Loosen the nut near the handle grip. Hook the blade on the front
axis and then the rear axis (teeth angle facing back towards the
handle grip). Tighten the nut to secure the blade. Locate/press the
front axis of the saw frame against a firm surface (take care not to
damage finished surfaces). Press/Push the handle to compress the
frame. Retighten the nut AS TIGHT AS POSSIBLE (the tighter the nut,
the better the saw performance).
How do I change the blade direction?
Loosen and remove the blade. Remove the front axis and rotate it to
change between Up/Down or Left/Right modes. Loosen Nut and turn rear
axis to match front axis. Then refit the saw blade as per blade
tightening instructions.
What types of saw blades are provided
with the saw?
They are 6" long (end to end including the mounting pins).
Can the saw blades be used in other
saws or tools?
Yes, They can be if the length is correct.
What are the dimensions of the saw
frame?
The saw frame is 9-3/4" overall length x 3" high at saw blade with a
2-1/2" cutting throat.
How do I store the spare blades in the
saw frame?
Loosen the Nut holding the saw blade and remove the blade. Pull the
saw frame out of the handle grip. Insert the spare blades into the
saw frame and reassemble frame.
